Consumables - Other In-Line Items

Sight Glass

Available in flare and solder-on, 1/4", 3/8", 1/2", 5/8", 3/4" & 7/8"

Solenoid Valve

Solenoid Coil: For solenoid valve, 220VAC

Solenoid Coil

For solenoid valve, 220VAC

Oil Separator

Available in various volume sizes, from 3/8" to 2-1/8"

• Situated as close to the compressor as possible
• Installed on the discharge line
• Uses a typical impingement screen
• 3.5 MPa maximum working pressure
• Returns oil to compressor crankcase
• 1/4” and 3/8” return connection

Mechanical Oil Level Regulator

• Controls the oil back to the compressor, keeping the oil level at the manufacturers recommended level with an adjustable float operated valve
• Adjustable between 1/2 and 1/4 level
• Capacity of 0.9 Litre of Oil
• Operating temperature: -40° ~ 80°C
• Operating pressure: 3 Mpa
• Bolts to the sight glass opening on the compressor

Suction Accumulator

Available in 1/2" to 1-5/8"

• Prevents compressor damage due to liquid flood-back of refrigerant, and oil dilution
• Located as close to the compressor as possible
• Must be installed upright
• In reverse cycle systems, the accumulator must be installed between the reversing valve and the compressor

Pressure Relief Valve

For liquid reciever, 350 psi, 1/2"

Shut Off Valve

Available in flare and solder-on, 1/4", 3/8", 1/2", 5/8", 3/4" & 7/8"

Vibration Absorber

Available in 3/8", 1/2", 5/8", 3/4", 7/8", 1-1/8", 1-3/8", 1-5/8", 2-1/8", 2-5/8" & 3-1/8"